Ready for insulation

All of the complex metal ductwork and control wiring systems are complete. We're ready for insulation!

Stone delivery and installation

We used cut natural limestone. Full shop drawings were done to architecturally align all joints and courses with the window and fascia modules. The quarry pre-cut all pieces to exact size and each palette delivered had stone pieces labele by location. Notice the color variation of the natural stone and the pixelated effect it has when the wall is done.

Wood flooring installed

We used quarter-sawn white oak. We also floated the subfloor level to align the finished flooring surface with the top of window sills to give an appearance of glass being set into the floor. Later in the project we will bleach and whitewash this oak before applying the finish coat.

Windows installed

We used a commercial storefront system with aluminum frames by Coral Industries and low-e insulated glass by Solarban

Slabtek Lifting

We used the slabtek foundation system which is an elevated post-tensioned concrete slab on piers. See for more info on how this foundation works and has high stability over time.